GD-3536D ASTM D92 Cleveland Open Cup COC Flash Point Apparatus
- The instrument is designed and made as per:
- GB/T3536 "Test Methods for Flash Point and Fire Point of Petroleum
Products (Cleveland Open Cup Methods),
- T0651 "Asphalt Flash Point and Fire Point Test (Cleveland Open Cup
Methods)" in the Industry Standard JTJ052 Specification and Test
Methods of Bitumen and Bituminous Mixtures for Highway Engineering.
- ASTM D92 "Standard Test Method for Flash and Fire Points by Cleveland Open
- It is used to determine flash point of petroleum products and
bituminous materials, excepting fuel oil and materials having a
flash point of lower than 79 centigrade.
|No.||Item Name||Fully Automatic Lubricating Oil Flash Point Tester|
|1||Power supply||AC(220±10%)V, 50Hz|
|2||Temperature measurement||Range:room temperature~400°C|
|3||Heating rate||Correspond with GB/T3536 and ASTM D92|
|4||Igniting mode||Electric ignition|
|Gas flame diameter: 3.2mm~4.8mm|
|(-6 to 400)°C, division value of 2°C|
|6||Bore diameter of spout||0.8mm|
|9||Maximum power consumption||500W|
- It is the best choice among the similar instruments.
- It adopts SCM controlling technologies, colored LCD, man machine
conversation interface, and blank buttons. It has prompt menu to
help inputting expected flash point, sample serial number,
barometric pressure, test date, and other parameters.
- It adopts desktop structure. It is advanced, friendly, convenient,
and accurate. It has been widely used in railway, aviation, power
plant, petrochemical industry, relative college and universities,
scientific research institutes, and measurement and inspection
department for petroleum product flash point and fire point test.
- Inquiry will be replied within 24 hours.
- Welcome to visit our factory.
- Technical datas and operation manual sent for evaluation.
- Training how to instal the machine, training how to use the machine
at our factory;
- Engineers available to service machinery overseas at customers'
Customers' Pre-shipment Inspection: